Keshe Technologies - Part 3 - Plasma Reactor Update

Good evening fellow Peaceful Revolutionaries.

A quick update on the 2 Keshe Plasma Reactor devices we ordered in early October 2015:

We were told that they are mechanizing production in the province of Québec, Canada, and they will be shipping to Canada in approximately one (1) month from now (so Christmas time -ish).

Though this is disappointing, its not entirely unexpected that the people in Canada would not be the first on the list with the Keshe Foundation headquarters being in Italy at this time.

This means likely we'll receive these device most likely in January, quite a while from now.

In the meantime, I've watched over 50 hours of Keshe workshop video explanations on the Keshe reactors and technologies alone, taking information directly from M. Keshe himself.

The videos are up on Kevin Flynn's youtube channel.

I gotta say, its been... enlightening.

I also took the time to watch and discuss with 3 other youtubers that have been building the Keshe reactors according to specifications and doing valid tests.   2 of which are, like me, skeptics but with good intentions and the third is what we could call a Keshe Foundation follower, but with a good mind, asking the right questions to figure stuff out.

Here are their Youtube channels:
Maverickstar Reloaded (process of making the full reactor and testing)
ZeroFossilFuel (making a reactor using great tools, lots of experience)
Mag Netron (Keshe Foundation follower, showing his progress )

I talk about this in better detail in my youtube video below:

For those of you that prefer reading, here is the gist of my reactions on the 50+ hours of listening to M. Keshe giving explanations on the reactor technology itself.

1. He's hard to follow due to the language barrier.  Not his fault, but be ready to spend a larger than normal amount of time listening to really understand what he's trying to say.  
2. The process of preparing what he calls the nano layer on the copper is very simply the oxidation of copper.  M. Keshe's description is not inaccurate though, as in the end you are placing a layer of individual molecules of CuO (black) and/or Cu2O (pink) over the copper.  For laymen, we're essentially using heated sodium hydroxide (or direct high heat) to "rust" the copper.
3. The second step of the process is to create the GANS.  From my understanding, GANS means Gas -state nano-structure.  M. Keshe describes it as a physical substance converted to a free energy CO2 (gas) state.  The description is very, very clumsy at best, and can be seen as lack of knowledge in chemistry (which would be weird even for a physicist).  The setup with the Oxidized copper and zinc as electrodes sitting in salt water is a process that was discovered in 1780 by Luigi Galvani, when he created the Galvanic cell (the first battery).  The Cu2O oxidation layer (the nano layer), being "loose" dissolves in the water and Zinc from the zinc plate goes in the salt solution to form Zn(OH)2 in this case, which precipitates as a white colloid.  Due to the impurities of ocean salt water (recommended) and some copper in the water, the color may become brown or turquoise (colors associated with precipitates of copper.  You can do the same experiment and get the same precipitates with a copper and zinc plate without any oxidization, though the color of the precipitate may be different as much less copper will go into the solution.  Now, this is traditional chemistry and how it works.  I cannot tell if this process also creates some differences in the subatomic, quantum or other sub-level (or what M. Keshe calls Plasmatic).  This remains to be seen with more tests.
4. Since the chemistry involved in making the gans and nanolayers is 100-250 years old, I can only surmise that the "magic" of Plasma is in the combination of the layers and the configuration of the copper coils etc.....  In order to be sure its all good, we need to test devices and see if 1kW of electricity will indeed convert, after 1-3 weeks, into 3-4kW and a reduction in the electricity bill. 
5. Let's see what the people I'm watching manage and us directly when we receive the devices.

Here are my general comments on those many hours and M. Keshe:

1. He says he has 40 years experience in nuclear physics, thus he should be intimately familiar with scientific methodology.  But in his explanations, he sometimes says he did many of the experiments 5/10/15 years ago and sometimes says he doesn't know what is letting the followers of the Keshe Foundation figure stuff out and report back.  The first part is great, scientists need to produce results in controlled environments.  The second part is also great in a way that he's crowdsourcing efforts globally, but its a little dangerous to encourage people to play with electricity, caustic liquids, high flames and plugging the equipment to their home systems without being certain what the impact its going to have in the house. 
2. M. Keshe says that the nanocoating will cover all the wires of the house and up to the energy generation plant (uranium rods).  He also says that the nanocoating will disable transformers.  Unless I'm mistaken, that means it will render your TV, computer and even the transformer across the street that is feeding your street unusable?  This remains to be seen as I cannot imagine the setup oxidizing wires like this over that distance, but if it works, people plugging it in their home will see devices blow up and perhaps the power company knocking on their door asking questions....  Remains to be seen, but be warned about this possibility.  I think it is careless that he's not writing these down very clearly from the get-go and I wonder why, in 40 years, that he hasn't noticed these things in lab tests?
3. He talks about biology and biochemistry, things that I'm intimately knowledgeable about, saying things like "the body is a superconductor" and "the human body is full of GANS".  I can't tell anyone about the GANS mention since he only knows what that means, but the body is definitively not a superconductor.  By definition a superconductor is a material that offers Zero resistance to the passage of current.  This is completely untrue.  Every instance of energy transfer in the body includes the usage of energy and the creation of heat through resistance.
4. He talks about the 3 coil setup as the Physical, the Soul and the Spirit coils.  Science has never proven the existence of Soul and Spirit, so he is introducing spirituality in the science here, with no proof to show for it.  It makes for a nice story to explain why the technology may perhaps heal, but it is unfounded.  On the other hand, he does say he's the Messiah, so if you believe in the unfounded claim, maybe everything he says MUST be the truth... right? (Ok I'm a little sarcastic here, I apologize, but aren't we trying to discover a new way to create free energy here or attending the Church of Keshe and hearing a sermon of belief and superstition?).  There IS quantum science that demonstrates that at a subatomic level everything in the universe is connected to everything else as well as the "Observer Effect" doing really odd things.

In a nutshell, having watched him talk for a long, long time.  He seems to be trying to get a lot of people experiment based on his theories and giving him results to further the gathering of knowledge around his reactor hypothesis and design (which isn't a bad thing on its own), but he contradicts things in the physical world that cannot be true and talks mostly about metaphysical theories of how the world is without fact or experiment to support what he says.

In conclusion, if the technology is genuine, he's not trying to convince rational people that are seeking answers.  He seems much more focused on convincing believers in metaphysical and spiritual elements (which cannot be scientifically proven) that whatever he says is true, without any supporting pieces of evidence.

As always, I'm interested in the technology and what it can bring to the world and though I've had enough of listening to M. Keshe's spiritual discussions on the Soul, I can follow great rational people who are honestly try to get the technology to work according to the Keshe Foundation's specifications. 

Maybe M. Keshe is only eccentric..... but I find he's also irresponsible in his approach and he should stick to the knowledge that he knows : physics and not biology and biochemistry.... those parts were terrible!

Peace out!

Make your own - Alternative Energy Device

Recently, I've been researching and discussing alternate energy devices with lots of people, either through this blog, or through my youtube channel.... mostly because of the Keshe Foundation analysis I did a couple weeks ago.

There is a growing interest in both weaning ourselves off the powerful energy cartels and "the Grid" but also to enter into a new era of peace, harmony and ... technology.  All things that are interesting to me, of course.

Since we haven't received the Keshe Plasma Reactors yet for testing, I decided that I would go over more conventional and better known alternate energy sources... focusing on the kind you could build yourselves to provide plentiful energy for your family.

All of the techs I'll present below can be done on the average budget and some for less than $100, which is great!

Thank you Open Source movement, and thank you Internet (== humans sharing freely and openly their expertise on the Internet!). 

In this article, we'll be going through these alternate technologies.  I'm going a little deeper in the following youtube video too:

1. Wind turbine power
2. Water turbine power
3. Kymogen Wave Energy Generator
4. Solar panel power
5. The Keshe Plasma Reactor

 

Wind turbine power

 



 

Wind turbines are simply propellers directed into the wind.  The wind catches the blades, make them spin, gets the generator moving, which creates your electricity.  Other things than a generator can be used (like a car's alternator) as the important part is to have a rotor with a stator that rotate one against the other.  Rotors and stators have coils of copper that generate magnetic fields and when the rotor turns near the stator, the magnetic fields "rub against each other", creating electricity in the copper wires.  Electricity generation 101.  :)

What you need to build a wind turbine to power your home:

• A generator
• Blades
• A mounting that keeps it turned into the wind
• A tower to get it up into the wind
• Batteries and an electronic control system

Basically you need to get all these parts to get started, most of which you can get from a scrap yard, equipment you already have around the house and don't use, and the missing pieces you can get from hardware stores and whatnot.  If you are frugal, you can make all this happen for less than $100.  If you prefer buying systems, but for about $4,000 USD per Kilowatt.  Not so cheap.

Advantages:

• Easy to operate and maintain
• Inexpensive to build
• Low expertise needed to build
• Can be scaled up to accommodate larger homes/neighbors by increasing blade diameter and other parameters
• Large amount of resources out there that can help

Disadvantages:

• Is known to kill birds at times that don't see the blades spinning and fly in
• Can be inefficient in areas where there is inconsistent wind flow

For instructions on how to build one, here is a link. 


Water turbine power

 



The water turbine principle is the same as for the wind turbine, except that instead of channelling the wind through blades that look like aircraft blades, you will want to channel water onto the blades that look more like spoons in order to capture the maximum amount of kinetic energy from the water.  What's great about water turbines is that its way easier to have a consistent turbine speed as the speed of the water is easier to control than... well, untameable wind.  Like the wind turbines, the spoon blades are spinning a generator (rotor and stator) to create your electricity flow in your cable.

What you need to build a water turbine to power your home:

• A generator
• "spoon-like" blades
• A mounting that keeps your blades in high speed current
• A setup that keeps the equipment it safely in the water stream without shortcut or corrosion issues
• Batteries and an electronic control system
• A water stream or river nearby (or make one, see below)

Again, like the wind turbines, most of the equipment needed to build one can be done with $100 or less, which is terrific but you have to think about how to set up the turbine safely within a water source like a river or stream, or better yet, build a way to channel a portion of racing water on to the turbine spoons to make them spin at a good consistent pace.  You can even create a water stream if you live on or near a mountain slope where you can channel rainwater down to your turbine setup, possibly also using the mountain to build a little aqueduct of fresh water at the same time for drinking water or water of general use.

Advantages:

• Easy to operate and maintain
• Inexpensive to build
• Low expertise needed to build
• Can be scaled up to accommodate larger homes/neighbors by increasing blade diameter and other parameters
• Large amount of resources out there that can help
• Consistent day to day electricity flow

Disadvantages:

• Won't work so well in freezing climates in winter as the water flow will diminish at least or totally freeze over.  Water levels will change too.
• Requires a racing water source, either natural or artificial for this to work

For instructions on how to build one, here is a link. 


Kymogen Wave Energy Generator

 



This device is ridiculously simple but not well know.  You may have heard of Tidal Wave Energy generation which takes the movement of the tides to generate mechanical movement between magnetic fields (i.e. in a similar way turbines turn to generate electricity), but tidal devices need to be Huge, which is impractical to building them near your home.  The Kymogen device is the tidal wave generator's little brother, one that can be set up to harness the kinetic energy of simple waves on a nearby lake.  The larger the waves the better.

Below is a link where you can check it out in detail.  The company tried to raise funds for a Kickstarter campaign, but it failed.  However, based on my research, it wouldn't be terrible to build such a device yourself.  The floating apparatus part that "rides the waves" is about 800 lbs total to properly sit on the waves and properly go up and down to generate juice but if you want to have a nice floating device at your cottage to play around with and swim around, why not combine it with energy generation?  There is no dangerous parts inside so why not?

Advantages:

• Easy to operate and maintain
• Relatively cheap to build, relative to the need for it to be large in size and weight. 
• Low expertise needed to build
• Can be combined to be used as a floating deck or diving board for the lake at the cottage
• Consistent day to day electricity flow

Disadvantages:

• Pretty large setup to generate electricity
• More energy is generated via larger waves, so size of equipment can't help.  More of them tethered would be needed to double or triple capacity, which may be undesirable visually and environmentally
• Not a lot of information out there on how to build these right now

For instructions on how to build one, here is a link. 



Solar Panels

Everyone is hot for solar panels, which is great because the sun is the ultimate renewable energy source right?  Well, its one of them and indeed pretty much there all day.  The issue is day lengths change depending on latitude on the globe, time of year and whether or not there are annoying clouds in the sky blocking the sun.

 

Personally, I love solar energy.  The issue I have is in the production of most of the commercially available solar panels, lots of pollution is created.  There are some now that are way more environmentally friendly in their production so please be careful when you shop.

 

Solar panels can be made at home, but its hard enough already to have decent efficiency of energy conversion, I would strongly recommend using commercial ones.  The link below has plenty of resources leading to building them or buying them, pros and cons etc.... for further research.

 

What is exciting about solar energy is that in many states, provinces and countries, there are government funded programs where you can actually get your solar farm financed and the extra energy sold back to the grid.  In Ontario, Canada, if you are accepted as part of the Feed Tariff Program you can get your solar energy done and maintained on your room and make perhaps a few thousand $ a year in cash for your trouble.  In Ontario, the reason why they do this is to get off the coal-burning plants we have to generate electricity.  Pretty cool deal to look into.

 

If you're not into such a thing, you can probably make due with the purchase of about 4-6 standard sized solar panels on your roof to generate enough electricity for your home.  If you are building an Earthship, you may need less as Earthships are great modern, environmentally friendly home concepts that are designed to be off the grid, thus energy requirements are minimalized even in cold weather.

 

For more information about Earthships, check this link out. 



Advantages:

• Well researched technology and stable equipment
• Combined with a battery system and the proper electricity flow controller, electricity flow is consistent
• Can take advantage of regional government Green programs to finance the setup and maintenance of a whole solar farm.
• Can easily feed back and make some decent money reselling extra electricity to the grid
• Solar energy resources are abundant on the internet

Disadvantages:

• Solar panels are expensive if you want your own setup
• Many solar panels are not environmentally friendly to manufacture.  Must take care on purchase.
• Not great for every latitude.  Best for areas with long days of sun with low cloud coverage yearly, for best results.

For instructions on how to build, buy or setup, here is a link. 



Keshe Plasma Reactor



This is something I've been investigating quite a bit for the last 2 weeks as its technology that defies our current scientific understanding, essentially creating a new branch of science alongside quantum physics to really understand.

 

I am in the process of validating this technology with other scientists and engineers by testing 2 of the devices and making sure its all on the "up and up".  Just because we can't really explain the science behind it all... if it does the job, we'll figure out the scientific principles fully afterwards, together and with the community. 

 

For the time being, I've added this to the list for 3 reasons:

1. The reactors are made of environmentally friendly components
2. Any person could build one to power their home for less than $100 using commonly available materials
3. This tech, if validated, could revolutionize the world and help bring world peace by completely demolishing the whole oil and energy industries towards something democratic (build it yourself) and controlled by the people.



At this point in time, I haven't received the ordered reactors, have not done validation tests but I have studied hours upon hours of videos and written materials. 

I consider this energy device as Theoretically ok.  For now and until quantitative and qualitative tests are done after device reception.  Standby for those results in future blogs.  I DO NOT encourage people to bet their livelihoods and change their lives at this point to convert to this technology. 

I would encourage people who are interested in this technology to assess it for themselves by watching and listening to videos posted in Kevin Flynn's youtube channel .  M. Flynn is one of M. Keshe's helpers for Youtube so you get official workshop videos on the science and how to build these reactors from this channel, and directly from M. Keshe, the nuclear physicist that has defined the science, dubbed Plasma science by him.

In a nutshell, the principle is all about converting physical copper wires into a cold superconductor, hence delivering a constant and infinite flow of electricity within the copper wire.  Superconductors, for those who don't know, have the property of having no electrical resistance, so in practicality, electricity generated by the device through plasma principles (see below) can flow any distance and at optimum strength within wires.

The copper wires become superconductors via a precise arrangement of matter around the copper wire from physical copper (the wire) to the deposition of nanoparticles (like CuO2) to what M. Keshe calls GANS (Gas state nanostructrures), something that looks like a paste.  This arrangement creates a gradient in the gravitational and magnetical (not magnetic... magnetical is a new word defined by M. Keshe for a force that opposes the gravitational) that drives the waveforms of the subatomic to channel these energies toward the wire.

Then the way the wires themselves are coiled and connected, creates gravitational and magnetical fields at a macro scale that pushes out electricity, after it has been primed by a smaller amount of electricity and the system brought to equilibrium (taking up to 3 weeks approx.).

If this is all correct (I may have made mistakes in the description above, and if so, I apologize... it IS a new science with little documentation to read about), then the matter states are stable, unlike a battery and its really the conformation of matter than creates a "push and pull" effect that ultimately flows the electricity along the now superconductive-like state wires. 

The result is a device that can last a lifetime and would generate energy for a home with a device that is roughly 1 foot high, requiring no maintenance at all and no replacement parts, aside from very normal wear and tear based on where the device is, and whether it is properly sealed from the outside world etc....

I know, its pretty funky and hard to follow but I think I "get" most of the theory.

I have only 2 issues with this:

1. I can only validate half the science as the other half is a brand new science with no documentation available.
2. I won't be convinced that the whole thing is real until I see a unit working for myself.  Then I can try to work with M. Keshe and others to figure out the details of the science so more people can do better applications of the tech.

IF IT CHECKS OUT:
Advantages:

• Free energy with no input required of other traditional forces.
• Can be set up out of the way easily
• Easy to build for less than $100 to feed energy to a whole house, no problem
• Materials are super easy to come by
• Environmentally friendly
• Theoretically would gradually convert all that is wired with the device into a superconductive material, increasing the electrical efficiency of a whole system (helping neighbors and communities)

Disadvantages:

• Information about how to build these is sketchy at best at this time.  Blueprints are being defined though as we go.
• Science is funky and only M. Keshe has a firm grasp of it.  He is teaching others at this time though.
• The technology and devices are untested in practice and are essentially "laboratory experiments" at best at this stage.  Some shortfalls like bursting incandescent light bulbs have been reported.  Experimentation is needed to figure how to use the tech in different situations, circumstances and how to scale them for larger capacities etc... Untested
• This technology is currently UNVALIDATED by any unbiased 3rd party entity.  A few like myself and the ZeroFossilFuel channel are attempting to do so from a skeptical point of view.

For more information about the Keshe Foundation  here is a link.  From there and Kevin Flynn's Youtube channel, you can check it all out.

This is it for now.  Stay tuned for another blog article of a revolutionary nature next week!