Most people worry about the economy because it is often in the
news as a measure of a nation’s wealth, and by extension the amount of money
available to individuals or families.Having money means an ability to purchase food, have a place to live and
of course provide the government with its share once a year in exchange for social
services.This cashflow between earning
money through work and expending to pay for goods and taxes is central to
modern economics.
It is the constant human struggle.It is expected in a world based on scarcity.
However, in our future, we can build on abundance instead thanks
to advanced technologies.As described
throughout this book, automation and artificial intelligence are technologies
capable of producing all the food we need and transporting it to our homes for
us to consume.The direct resource
expenditure for these automated systems is the energy consumption for the
robots to do the work and the cost of repairing these automated systems (new
parts).Robots can maintain themselves
and run on solar energy, so the only net physical resource needed to keep a
100% automated robotic system alive are the raw materials required to maintain
the robots themselves.
These automated systems will use the energy of the sun, which is
free as well. So, ultimately, in fully automated systems we can already build
today, and deploy in every single industry in our future, the only energy
needed to keep everything going comes from the sun.
We know that the totality of human civilization on Earth consumes
a bit more than 15 terawatts.[1]If we calculate the amount of sunlight that
hits the surface of the state of Texas, it amounts to a total of 696
terawatts.So right now, the potential
total solar energy we could capture from a surface as big as the state of Texas
would be over 46 times more than the total world’s energy consumption. The world is way, way, way bigger than the
state of Texas, so there is a lot of solar energy hitting the surface.Also, remember that solar is not the only appealing
and sustainable source of energy we could use.
The point is, once we manage to create good enough AI to work on
its own, better than humans could, and start using fully automated systems to
produce the basic goods and services humanity needs, the actual societal and
economical cost of these products and services will be near zero.
To illustrate this concept a bit further, let’s look at a fairly
new technology called 3D printing.3D
printers are like document printers in many ways but instead of using sheets of
paper in the feed, they usually use other materials like resins, molten
plastics, powders and even molten metals.The information provided to the printer is a 3D model, which is a file
taking up no resources at all.With an
active 3D model file, the 3D printer goes to work, uses up the materials
provided and electricity, and creates the 3D model made up of the materials
provided.
Now the interesting part:what was the cost of the object produced using the 3D model exactly?
The answer is, exactly the cost of the energy used for the 3D
printer, which is often negligible, and the cost of the materials fed in.It is just like a normal printer.When we think of the costs related to a
document printer, we think about the cost for the ink and the paper.Those are the only major costs to print out a
document.Ink and paper are fed in, electricity
is used, and you have your document ready.The source file for the documents printed have little to no value since
they can be reused infinitely.
Same applies to 3D printers.Whether the 3D file we use is extremely complex, artistic and detailed,
or something simple like say a basic cube, the cost of the object is equal to
the amount of material used to create the object.Hence a masterwork sculpture model bust of
Mahatma Ghandi made from resin weighing 10 kilograms will cost the same as a
basic cube weighing 10 kilograms if printed in a 3D printer.
The cost for the 3D file may be somewhat different, but a file can
be printed an infinite amount of times, just like a normal Word or PDF file.So, anything that is created using automated
devices without significant human intervention has a value determined by two
factors only:
The real cost of the object
The subjective value given to it from human
buyers
Both concepts of value are well understood.Real cost could be based on the abundance of
the materials used to build product according to principles of offer and
demand.The rarer, the harder to store
or more difficult a material is to come by, the more expensive the resource
will be.The subjective value is based
entirely on trends, perceived rarity, emotional attachments and so on.After all, the value of one of your
children’s artistic creations may be much higher than a Rodin statue 3D printed
out of titanium.After all, the piece
made by your child is unique and made by his or her hand, while the Rodin is
only worth it’s weight in titanium.Titanium is surprisingly inexpensive at $200-$400 per kilogram.
Money is therefore only a way to allow for fair trade between
individuals.
Where today’s costs become inflated is whenever we need to add the
costs of labor.Products requiring more
employees or higher skill levels, or more steps to produce from the raw materials
to the shelves, tend to cost more because more people with more skills are
needed. Robots don’t need to be paid,
don’t become sick, don’t complain.They
only need maintenance, which can be done by other robots.So as our industries replace human labor with
smart robots, the costs of production will eventually reach the cost of the raw
materials once all the human workers are replaced.
Since the government is there to ensure the people are taken care
of and ensure the resources and land below our feet belong to the people, the
economy in the ideal world indeed becomes an economy for the people.
[1]
Maria Trimarchi.How much power does the
world consume?- https://science.howstuffworks.com/environmental/green-science/world-power-consumption.htm
When we think about solar panels or solar energy, we always think of hot solar panels that are installed on top of building's roofs over top of shingles or flat surfaces.
Generally, they are an eyesore and expensive to install.
Well, since the solar power business has boomed in many parts of the world, and governments and private sector alike are now interested in powering up their grids with renewable energies, lots of private companies, laboratories and public sector entities have thrown in their cash and started developing solar energy programs, new solar energy techs and programs for the mass market.
Europe, China, India, the US, South Korea and Japan all have invested HUGE amounts in the technology and in some places, like in 2017 India, solar power is just as cheap as coal power!
This is what drives whole businesses to change, including the Energy industry.
And with interest in the market, comes innovation, not only in efficiency, but also in form factor and ergonomics.
I discuss this movement and where it may lead in the video below:
Now for some examples of great looking solar panels:
IKEA
Yep, Ikea is ready to sell you solar panels of its own. Fortunately (or is it unfortunately), you won't be installing these yourself. Experts do it after delivery. They look pretty standard for solar panels, so nothing very beautiful about those, however, it does show that solar panels are becoming a sort of commodity in a similar way that LED lighting has become something of a standard for car lights nowadays.
TESLA
I love Tesla's concepts. They always think of beauty whenever they design something, whether it is their cars, their battery packs and now solar panels on the roof. The image below shows the new concept they are going with. Can you tell that those shingles are actually solar panels? This is a case of camouflage indeed! You wouldn't know if those were solar cells or just normal shingles...
BUILD SOLAR
We've heard of solar roofs and solar windows. But how about making opaque or semi-transparent walls solar power capable as well? This company's concept can make walls look futuristic, have good insulation and generate power as well. I don't think these are out yet, but does show some ideas and innovation.
SKYCOOL SYSTEMS
This is a spinoff company from Stanford University and these are NOT solar panels. What they do is perhaps act to avoid additional energy needs for cooling buildings in hot areas or hot times of the year, thus avoiding the need for solar panels in the first place. Less juice needed for cooling = less energy demand on the building. The concepts currently look like ugly solar panels, unfortunately, but they could be melded properly to a roof surface in a similar way to the Ikea idea for solar roofs (or perhaps better), once they get these into commercial form factors. What these panels do is absorb thermal energy (heat) from the bottom surface in contact with the building and shoot the radiation out into the cold, cold vacuum of space. It's top reflective surface reflects 97% of all of the sun's energy back to where it came from, thus keeping the building cool even in strong heat. Now, these clever guys thought of something pretty neat: what if they coat solar panel surfaces with their energy re-transmission material? That has the effect of keeping the solar panel cooler (increasing solar panel efficiency), and keeping the building underneath cooler as well, thus reducing the need for electricity in the first place. So combining both material and solar panel tech could potentially require us to use fewer solar panels and still have energy to spare. Great idea guys!
All in all, the Solar Energy industry is just gearing up as costs for solar are down enough to warrant such investments. This will in turn make solar energy even more cost-effective than it is now... and with clever people working on these, we can have nice homes and offices, fully charged, nice to look at, and COOL!
Recently, I've been researching and discussing alternate energy devices with lots of people, either through this blog, or through my youtube channel.... mostly because of the Keshe Foundation analysis I did a couple weeks ago.
There is a growing interest in both weaning ourselves off the powerful energy cartels and "the Grid" but also to enter into a new era of peace, harmony and ... technology. All things that are interesting to me, of course.
Since we haven't received the Keshe Plasma Reactors yet for testing, I decided that I would go over more conventional and better known alternate energy sources... focusing on the kind you could build yourselves to provide plentiful energy for your family.
All of the techs I'll present below can be done on the average budget and some for less than $100, which is great!
Thank you Open Source movement, and thank you Internet (== humans sharing freely and openly their expertise on the Internet!).
In this article, we'll be going through these alternate technologies. I'm going a little deeper in the following youtube video too:
Wind turbine power
Water turbine power
Kymogen Wave Energy Generator
Solar panel power
The Keshe Plasma Reactor
Wind turbine power
Wind turbines are simply propellers directed into the wind. The wind catches the blades, make them spin, gets the generator moving, which creates your electricity. Other things than a generator can be used (like a car's alternator) as the important part is to have a rotor with a stator that rotate one against the other. Rotors and stators have coils of copper that generate magnetic fields and when the rotor turns near the stator, the magnetic fields "rub against each other", creating electricity in the copper wires. Electricity generation 101. :)
What you need to build a wind turbine to power your home:
A generator
Blades
A mounting that keeps it turned into the wind
A tower to get it up into the wind
Batteries and an electronic control system
Basically you need to get all these parts to get started, most of which you can get from a scrap yard, equipment you already have around the house and don't use, and the missing pieces you can get from hardware stores and whatnot. If you are frugal, you can make all this happen for less than $100. If you prefer buying systems, but for about $4,000 USD per Kilowatt. Not so cheap.
Advantages:
Easy to operate and maintain
Inexpensive to build
Low expertise needed to build
Can be scaled up to accommodate larger homes/neighbors by increasing blade diameter and other parameters
Large amount of resources out there that can help
Disadvantages:
Is known to kill birds at times that don't see the blades spinning and fly in
Can be inefficient in areas where there is inconsistent wind flow
The water turbine principle is the same as for the wind turbine, except that instead of channelling the wind through blades that look like aircraft blades, you will want to channel water onto the blades that look more like spoons in order to capture the maximum amount of kinetic energy from the water. What's great about water turbines is that its way easier to have a consistent turbine speed as the speed of the water is easier to control than... well, untameable wind. Like the wind turbines, the spoon blades are spinning a generator (rotor and stator) to create your electricity flow in your cable.
What you need to build a water turbine to power your home:
A generator
"spoon-like" blades
A mounting that keeps your blades in high speed current
A setup that keeps the equipment it safely in the water stream without shortcut or corrosion issues
Batteries and an electronic control system
A water stream or river nearby (or make one, see below)
Again, like the wind turbines, most of the equipment needed to build one can be done with $100 or less, which is terrific but you have to think about how to set up the turbine safely within a water source like a river or stream, or better yet, build a way to channel a portion of racing water on to the turbine spoons to make them spin at a good consistent pace. You can even create a water stream if you live on or near a mountain slope where you can channel rainwater down to your turbine setup, possibly also using the mountain to build a little aqueduct of fresh water at the same time for drinking water or water of general use.
Advantages:
Easy to operate and maintain
Inexpensive to build
Low expertise needed to build
Can be scaled up to accommodate larger homes/neighbors by increasing blade diameter and other parameters
Large amount of resources out there that can help
Consistent day to day electricity flow
Disadvantages:
Won't work so well in freezing climates in winter as the water flow will diminish at least or totally freeze over. Water levels will change too.
Requires a racing water source, either natural or artificial for this to work
This device is ridiculously simple but not well know. You may have heard of Tidal Wave Energy generation which takes the movement of the tides to generate mechanical movement between magnetic fields (i.e. in a similar way turbines turn to generate electricity), but tidal devices need to be Huge, which is impractical to building them near your home. The Kymogen device is the tidal wave generator's little brother, one that can be set up to harness the kinetic energy of simple waves on a nearby lake. The larger the waves the better.
Below is a link where you can check it out in detail. The company tried to raise funds for a Kickstarter campaign, but it failed. However, based on my research, it wouldn't be terrible to build such a device yourself. The floating apparatus part that "rides the waves" is about 800 lbs total to properly sit on the waves and properly go up and down to generate juice but if you want to have a nice floating device at your cottage to play around with and swim around, why not combine it with energy generation? There is no dangerous parts inside so why not?
Advantages:
Easy to operate and maintain
Relatively cheap to build, relative to the need for it to be large in size and weight.
Low expertise needed to build
Can be combined to be used as a floating deck or diving board for the lake at the cottage
Consistent day to day electricity flow
Disadvantages:
Pretty large setup to generate electricity
More energy is generated via larger waves, so size of equipment can't help. More of them tethered would be needed to double or triple capacity, which may be undesirable visually and environmentally
Not a lot of information out there on how to build these right now
Everyone is hot for solar panels, which is great because the sun is the ultimate renewable energy source right? Well, its one of them and indeed pretty much there all day. The issue is day lengths change depending on latitude on the globe, time of year and whether or not there are annoying clouds in the sky blocking the sun.
Personally, I love solar energy. The issue I have is in the production of most of the commercially available solar panels, lots of pollution is created. There are some now that are way more environmentally friendly in their production so please be careful when you shop.
Solar panels can be made at home, but its hard enough already to have decent efficiency of energy conversion, I would strongly recommend using commercial ones. The link below has plenty of resources leading to building them or buying them, pros and cons etc.... for further research.
What is exciting about solar energy is that in many states, provinces and countries, there are government funded programs where you can actually get your solar farm financed and the extra energy sold back to the grid. In Ontario, Canada, if you are accepted as part of the Feed Tariff Program you can get your solar energy done and maintained on your room and make perhaps a few thousand $ a year in cash for your trouble. In Ontario, the reason why they do this is to get off the coal-burning plants we have to generate electricity. Pretty cool deal to look into.
If you're not into such a thing, you can probably make due with the purchase of about 4-6 standard sized solar panels on your roof to generate enough electricity for your home. If you are building an Earthship, you may need less as Earthships are great modern, environmentally friendly home concepts that are designed to be off the grid, thus energy requirements are minimalized even in cold weather.
Combined with a battery system and the proper electricity flow controller, electricity flow is consistent
Can take advantage of regional government Green programs to finance the setup and maintenance of a whole solar farm.
Can easily feed back and make some decent money reselling extra electricity to the grid
Solar energy resources are abundant on the internet
Disadvantages:
Solar panels are expensive if you want your own setup
Many solar panels are not environmentally friendly to manufacture. Must take care on purchase.
Not great for every latitude. Best for areas with long days of sun with low cloud coverage yearly, for best results.
For instructions on how to build, buy or setup, here is a link.
Keshe Plasma Reactor
This is something I've been investigating quite a bit for the last 2 weeks as its technology that defies our current scientific understanding, essentially creating a new branch of science alongside quantum physics to really understand.
I am in the process of validating this technology with other scientists and engineers by testing 2 of the devices and making sure its all on the "up and up". Just because we can't really explain the science behind it all... if it does the job, we'll figure out the scientific principles fully afterwards, together and with the community.
For the time being, I've added this to the list for 3 reasons:
The reactors are made of environmentally friendly components
Any person could build one to power their home for less than $100 using commonly available materials
This tech, if validated, could revolutionize the world and help bring world peace by completely demolishing the whole oil and energy industries towards something democratic (build it yourself) and controlled by the people.
At this point in time, I haven't received the ordered reactors, have not done validation tests but I have studied hours upon hours of videos and written materials.
I consider this energy device as Theoretically ok. For now and until quantitative and qualitative tests are done after device reception. Standby for those results in future blogs. I DO NOT encourage people to bet their livelihoods and change their lives at this point to convert to this technology.
I would encourage people who are interested in this technology to assess it for themselves by watching and listening to videos posted in Kevin Flynn's youtube channel . M. Flynn is one of M. Keshe's helpers for Youtube so you get official workshop videos on the science and how to build these reactors from this channel, and directly from M. Keshe, the nuclear physicist that has defined the science, dubbed Plasma science by him.
In a nutshell, the principle is all about converting physical copper wires into a cold superconductor, hence delivering a constant and infinite flow of electricity within the copper wire. Superconductors, for those who don't know, have the property of having no electrical resistance, so in practicality, electricity generated by the device through plasma principles (see below) can flow any distance and at optimum strength within wires.
The copper wires become superconductors via a precise arrangement of matter around the copper wire from physical copper (the wire) to the deposition of nanoparticles (like CuO2) to what M. Keshe calls GANS (Gas state nanostructrures), something that looks like a paste. This arrangement creates a gradient in the gravitational and magnetical (not magnetic... magnetical is a new word defined by M. Keshe for a force that opposes the gravitational) that drives the waveforms of the subatomic to channel these energies toward the wire.
Then the way the wires themselves are coiled and connected, creates gravitational and magnetical fields at a macro scale that pushes out electricity, after it has been primed by a smaller amount of electricity and the system brought to equilibrium (taking up to 3 weeks approx.).
If this is all correct (I may have made mistakes in the description above, and if so, I apologize... it IS a new science with little documentation to read about), then the matter states are stable, unlike a battery and its really the conformation of matter than creates a "push and pull" effect that ultimately flows the electricity along the now superconductive-like state wires.
The result is a device that can last a lifetime and would generate energy for a home with a device that is roughly 1 foot high, requiring no maintenance at all and no replacement parts, aside from very normal wear and tear based on where the device is, and whether it is properly sealed from the outside world etc....
I know, its pretty funky and hard to follow but I think I "get" most of the theory.
I have only 2 issues with this:
I can only validate half the science as the other half is a brand new science with no documentation available.
I won't be convinced that the whole thing is real until I see a unit working for myself. Then I can try to work with M. Keshe and others to figure out the details of the science so more people can do better applications of the tech.
IF IT CHECKS OUT: Advantages:
Free energy with no input required of other traditional forces.
Can be set up out of the way easily
Easy to build for less than $100 to feed energy to a whole house, no problem
Materials are super easy to come by
Environmentally friendly
Theoretically would gradually convert all that is wired with the device into a superconductive material, increasing the electrical efficiency of a whole system (helping neighbors and communities)
Disadvantages:
Information about how to build these is sketchy at best at this time. Blueprints are being defined though as we go.
Science is funky and only M. Keshe has a firm grasp of it. He is teaching others at this time though.
The technology and devices are untested in practice and are essentially "laboratory experiments" at best at this stage. Some shortfalls like bursting incandescent light bulbs have been reported. Experimentation is needed to figure how to use the tech in different situations, circumstances and how to scale them for larger capacities etc... Untested
This technology is currently UNVALIDATED by any unbiased 3rd party entity. A few like myself and the ZeroFossilFuel channel are attempting to do so from a skeptical point of view.